Secure checkout by Stripe — processed under our parent merchant name, Quote Aftercare (Watkins and Sons Ventures LLC) · Instant download after payment
7-day satisfaction refund — if the materials aren't right for your prep, email [email protected] within 7 days for a full refund.
Preview the workbook
Actual pages from the ASE A5 Brakes Module 1 workbook — the same PDF you download after checkout. Every module follows this format: a follow-along worksheet for each lesson, lesson check questions, a timed module quiz, and a complete answer key with rationales.
Timed module quiz — Module 1 workbook, PDF page 38Follow-along worksheet — Lesson 1.1, Module 1 workbook, PDF page 2Answer key with rationales — Module 1 workbook, PDF page 44
Sample questions from the pack
Three questions from the ASE A5 question bank. Pick your answer, then open the reveal to check it and read the explanation.
Sample question 1 (Q1.7-4, Module 1)
An unloaded pickup's rear wheels lock before the fronts during hard braking. The proportioning valve is a height-sensing type. Which of these could be the cause?
The sensing linkage is seized at the loaded (high) position
The metering valve is stuck closed
The master cylinder compensating port is blocked
The front pads are worn out
Show answer
Answer: A. Frozen at the loaded setting, the valve passes high rear pressure the empty bed's tires can't use. Distractors: B affects front timing on light stops; C self-applies all brakes with heat; D doesn't raise rear pressure. Source: Task A13.
Sample question 2 (Q2.2-3, Module 2)
A drum's friction surface shows bluish, raised, heat-checked islands that a fingernail catches on. These are:
Normal machining marks
Hard (heat) spots — the drum's heat damage, generally a replace decision
Rust scale that will wear off
Glazing that sandpaper cures
Show answer
Answer: B. Hard spots are metallurgical damage; lathe bits skate over them and they return. Distractors: A — machining marks are uniform grooves. C/D dress up damage as cosmetics. Source: Task B3.
Sample question 3 (Q4.5-1, Module 4)
At key-on, both brake warning lamps illuminate for a few seconds. This is:
A fault
The bulb check / prove-out — a lamp that does NOT light here is itself diagnostic data
A bulb test only the dealer can interpret
Low voltage
Show answer
Answer: B. Prove-out verifies the telltales themselves. Distractors: A inverts it. C/D deflect. Source: Task D3.
What's included
Every A5 module workbook.
The complete 300-question bank with answer explanations.
Three printable mock exams with answer keys.
Printable worksheets for personal study.
The three mock exams use questions from the same bank. Their questions are not added to the unique-question count — the pack's 300 questions are the bank itself.
Format & delivery: one download — a ZIP of printable PDF workbooks. Checkout is a one-time payment by card through Stripe; after payment, your download begins on the confirmation page. Print the pages or study them on any device that opens PDFs.
Use the pack to study away from video, work through questions on paper, and organize your review in one place.
Complete pack or single module?
Buying one topic at a time? Each module below is $9.99 and includes only that module's workbook and its questions — not the other modules or the Finals. The complete pack above includes everything.
Module 1: Hydraulic, Power Assist & Parking Brake Systems — Module 1 workbook only.
Module 1 only — $9.99
Yes. The video lessons remain free. The paid pack gives you the material in an organized, printable format, with practice questions, explanations, and mock exams. Some content overlaps with the free lessons. The free course lives on the ASE A5 course page.
What am I buying?
Downloadable PDF study materials for ASE A5 preparation. This is not an interactive testing app or an official ASE certification.
What if it isn't right for my prep?
Digital packs carry a 7-day satisfaction refund — email [email protected] within 7 days of purchase for a full refund to your original payment method.